05 五 10 Wind power this year, exports will send power machine
In an increasingly competitive domestic market situation, since 2009, many wind power machine manufacturers began to enter the international market. This year can be said is the first year the export of wind turbines.
Among them, the Golden Wind wind turbine technology exported to the U.S., day prestige motor group signed an agreement exported to Australia, many Vietnamese enterprises to obtain orders for wind turbine. Expected from 2010 onwards, part of the wind machine enterprises export business will reap good profits.
Experts believe that the wind power industry, domestic and international market situation is getting better and export will be machine made in 2010, force, can effectively promote the sustained and healthy development of wind power industry. But its resistance and risk factors can not be ignored.
The first new energy policy support than expected. China’s development of new energy industries, but the short term can not radically change to our current installed capacity of thermal power-based power structure. Therefore, the new energy policy support and the introduction of time may be lower than wind generators expected. Second, fluctuations in raw material prices. Copper, aluminum, silicon and other raw material prices, historically, long-term volatility, this situation will increase the difficulty of production organization, operational risk has increased.
Tags: Wind power
28 四 10 Jilin focus on the development of four new wind power and other energy industry
Located in the middle of Jilin Province in Northeast will be the development of new energy industries as a strategic priority to support emerging industries, using provincial resources, and focus on developing wind power, solar, biomass, and four new nuclear energy industry.
Learned from the Jilin Province Development and Reform Commission’s Jilin Province plans to 2015, the new energy industry to achieve 100 billion yuan output value.
According to the plan, Jilin Province will accelerate the construction of 10 million kilowatts of wind power base, choice based on the areas with better conditions, planning and construction of photovoltaic power plants and buildings combined with pilot projects and small-scale photovoltaic power generation systems, and promote nuclear power project preliminary work Jingyu Akamatsu and promote mainly used in comprehensive utilization of straw biomass power generation projects, biomass clean energy base to speed up construction.
In addition, Jilin Province is also proposed to accelerate the development of new energy equipment manufacturing industry, focusing on support for wind power, nuclear power equipment manufacturing industry localization, and promote the development of core technologies.
To speed up the development of new energy industries, Jilin Province will wind turbines implement a series of province-wide new energy utilization project, including the promotion of solar energy demonstration project to promote the straw power generation, Jie Gan system gas technology applications, combined with small towns to build a number of straw gas system equipment, cement, steel, wind generators metallurgy and other industries to promote heat, I re-use gas power generation.
Jilin Province as one of China’s old industrial base, its relative lack of coal resources. But as important agricultural provinces of Jilin produces each year a large number of corn stalks can be used for biomass energy development. Meanwhile, western Jilin is rich in wind resources, is one of the national wind energy-rich poly area.
Tags: Wind power
23 四 10 China electric wind turbines instrument business into harvest
Of the wind power industry, 2009 is not a good prosperous years, intense market competition and price fluctuations machine, are greatly weakened the wind industry’s gross profit margin. However, wind power, including state regulation of excess capacity, new technology breakthroughs, and China is expected to wind turbine electrical apparatus as increases in orders, 2010, China Electric usher in a new instrument development opportunities.
“Wind power capacity will be expected to accelerate development to keep pace with high-voltage switch business.” Hua Jiang Fujun instrument electrical secretaries to directorate told reporters.
Traditional business and wind power generators business
This year is expected to keep pace
Chinese Instrument Electric annual report for 2009, 1.198 billion yuan last year, operating income, up 54.6%; net profit 89.4098 million yuan, up 14.64 percent. Among them, two wind power blocks of business are the main high-voltage power distribution products, and wind power. From the Annual Report of view, the two main business electric meter, the traditional high and low voltage power distribution products is still the main source of profit. Report shows that high and low voltage power distribution products, operating income was 679 million yuan, 494 million wind turbine group, there is another piece of independently developed software products, operating income for 2009, 6.29 million yuan.
Although the results from the 2009 run, is still the traditional high and low voltage distribution products as the leading, but this year the wind turbines business with the Chinese instrument explosive growth pattern will change significantly. Corporate Annual Reports, this year’s overall business towards more than 20 billion revenue, business scale wind turbine will maintain rapid growth, the traditional high and low pressure is expected to be split evenly and wind power, basically the same sales volume.
At present, the Chinese wind instrument electric power business, mainly from its lung power of 1.5MW in 2009 won the order has reached 120 fans around. According to GF Securities researcher Li Weiqing analysis, order the existing fans, coupled with the second half of the company’s manufacturing base can Tongyu production, will also direct access to 50,000 kilowatts of order, consider the first half of the wind generators farm Investment tender peak meter to get this year China produced 200 sets of orders and sales are high probability events, its wind power business in 2010 on sales to more than 1.3 billion yuan.
“This year get orders is transparent, the only can not determine that the order has been received in that year profits would not necessarily realize that some orders may be delayed until next year to deliver.” Jiang Fujun said.
In the traditional development of high and low voltage parts, electrical apparatus and China did not give up, “after all, which started the main business, will not give up.” Jiang Fujun said: “The high and low voltage components in the sales area has also been a breakthrough and began to enter the petrochemical industry and try to enter the high-speed railway, real estate and other industries, sales this year will be a breakthrough. “
Tags: wind turbines
17 四 10 The first sets the intertidal zone successfully lifting the wind turbine
Recently, Jin Feng Technology Co., Ltd. in Jiangsu Province, the water ring of the 2.5MW wind farm wind turbine successfully completed loading. This is a golden first wind technology installed wind turbine intertidal zone, the intertidal zone to develop future wind turbine foundation.
According to reports, the project from the Yangtze New Energy Development Co., Ltd. together with Goldwind, in December 2009 started construction of fan base, early in March 2010 began to fan equipment supplier, from the March 18 start lifting, 24, a smooth Lifting completed. Ongoing construction and electrical control systems engineering submarine cable laying, and the network is expected to run in May to achieve.
Project used Goldwind 2.5MW fans in the Yangtze River Xiangshui new wind energy ring water intertidal area, just 600 meters from the seawall line, to overcome tidal flood, typhoons and other adverse natural conditions. For the special geographical environment and climate conditions, gold wind generators technology product design capability to play a series, provided the owners meet the needs of the intertidal zone fans. In addition, gold 2.5MW wind technology permanent magnet direct drive fans with advanced permanent magnet direct drive technology and full-power converter technology, simple structure, high reliability, high quality power generation, and Network Characteristics superior, low-voltage across the remarkable ability and so on.
Tags: wind turbine
06 四 10 Wind power development should be synchronized with the network planning
There are many places on the launched wind turbines project very enthusiastic, but there are a number of worth attention: all countries have officially approved wind power projects, then net rate of over 90%, while the regional planning of wind power projects, access network rate less than 60%. Wind power development and national planning should dovetail, and the country’s power grid construction and the only focus of the Network Planning and synchronization of the development of wind power in order to avoid unnecessary waste.
For example, individual regions such as Inner Mongolia Wind Power wind phenomenon of abandoning the one hand, special weather caused the other hand, power grid construction lag, caused by a lack of regulation. West Inner Mongolia and North China power grid to solve the problem of separating both from the technical and mechanisms.
Today, wind power development in China has gone through a rapid growth phase, is the transition to the stable growth period. From government to business, to recognize the reality and calm wind power project deal. Our wind power installed capacity has been 100% for 5 years, the speed of development, doubling that to continue for many years is unrealistic, but in the future to sustain this rate of 10% to 20%, is reasonable.
Also of concern is the rapid development of wind power behind a number of hidden potential risks. For example, wind power companies enjoy the value-added tax relief, income tax, “two exemptions, three half” of preferential policies greatly affect the enthusiasm of local governments. Gansu, for example, on the base of 10 million kilowatts of wind power production and wind turbine generator , the remove tax incentives, local government almost nothing; wind power projects boost local employment effects are quite limited; where there is no wind power equipment manufacturing, value-added Tax rebates can not benefit local businesses.
To solve these problems, we can not just only on the relevant subjects of the mentioned requirements. How to protect the interests of various interest groups, how to redistribute the benefits of clear rules is given, the Government should seriously consider. To make the equipment manufacturers have a certain profit, wind generators companies have a certain efficiency, power companies have certain incentives, local governments have a certain return, local residents have certain benefits. These five “some” have regard to all aspects of the initiative can mobilize, the sustainable development of wind power can be achieved.
Tags: Wind power
06 二 10 W67Y hydraulic press brake(popular machine)
As the elevation of lower roller is constant, it is very convenient to feed and operate.
Detailed electrical schematic diagram will be provided and electrical wiring shall be made strictly as required by the drawings. Both ends of every connecting wire shall bear clear and intact number with marks of the same wire number with the connecting wire number put up on the wire terminals, which shall be indicated clearly on the electrical wiring schematic diagram.
All electrical parts of the equipment shall be superior quality products from noted enterprises and electrical protector parts (e.g. current relay, air switch and so on) shall be tested carefully before the installation to insure effective operation.
Hydraulic units used for the equipment shall be products from chinese famous Company.
The equipment shall run stably and control flexibly without blockage, leakage and abnormal noise.
The paint surface shall be clean, level and shining brightly with even thick paint film while without flow mark, leakage and other defects.
The tipping frame shall be of hydraulic tipping type and high speed.
Hydraulic transmission shall be applied for vertical displacement of upper roller and high mechanical transmission speed shall be applied for horizontal movement.
The equipment shall be highly effective and reliable with low potential for malfunction.
Tags: hydraulic press brake
04 一 10 Angle Steel Bending Machine
Angle and Flat steel round machine technical data:
1. Bend angle iron spec: 2-5#
2. Bend flat steel spec: -25*4
3. Minimum roll round diameter: Φ250(2#Angle steel, -25*4Flat steel), Φ600(5#Angle steel)
4. Roll round speed: 2m/min
5. Consume power: 4kw
6. Equipment weight: 325kg
Characteristic:
1. Used for roll round angle iron orchid flat steel ring flange.
2. One can roll make a lot of the same specification ring flange, province work and material.
3. Don’t change angle steel section form after the rolls of round, shape roller select the good steel, the intensity
Is high, life is long.
Our company:
Our main products: Spiral tube forming machine, flexible duct forming machine, auto roof forming machine, riveting machine, Pittsburgh seam lock machine. Hydraulic section steel bending machine, metal sheet flange forming machine,
TDF hydraulic folder, auto cutting to length line, pipe bending machine, FN seam welder, notching and shearing machine.
Tags: Steel Bending Machine
28 十二 09 CNC Aluminium Profiles Bending Machine
Digital display aluminum profiles plate bending machine Used for bending aluminum alloy channel material, angle Used for bending aluminum profile, metal profile, copper profile or special-shaped profile etc. Suitable for furniture making and iron art processing, iron window and door or aluminum window and door making.
Adopt CNC control of the machinery, easy operating and high precision. The bending range is wide, specially used for decoration craft. Adopt special device to protect the profiles when processing. Adopt colored man-machine touch-sensitive screen control; The interface is clear and easy to operate. Adopt the imported integrated PLC control, with the self-measuring and self-diagnosing function. The circuit is of high stability and nice environmental applicability and can upgrading by long distance operation through net-works.
Tags: Bending Machine
18 十二 09 CNC Pipe Bending Machine (SB-38CNC)
CNC Pipe Bending Machine, CNC 2 Servo Motor Controlled Axes with NC Hydraulic Tube Benders
Special Features:
1. Fully automatic and cost effective CNC tube bender
2. Equipped with 3 programmable axis
3. Feeding: Servo motor
4. Rotation: Servo motor
5. Bending: Hydraulic (NC)
6. Hydraulic pressure die assist for every bending stack
7. Mandrel lubricating system
8. Wiper, clamping and pressure die seats
9. Centralized greasing system for moving areas
10. Electric cabinet cooling fan
11. Touch screen system
12. CNC 2 servo controlled axes with NC hydraulic bending
Fully automatic and cost effective
Key Specifications:
Max. Bending capability: ø 38.2 x 2.0t
Max. Bending radius: 180mm
Max. Bending angle: 210°
Standard effective mandrel length: 2200mm
Bending speed: 100° /s
Rotation speed: 220° /s
Feeding speed: 1200mm/s
Bending precision: ± 0.1
Rotation precision: ± 0.1
Feeding precision: ± 0.1
Total power: 5.5Kw
Max. Pressure: 12Mpa
Size: 3900x1000x1200mm
Weight: 1800Kg
Standard Accessories:
1. Tool Kit
2. Tooling Package
3. Manual Book
Primary Competitive Advantages:
1. Country of Origin
2. Experienced Technical Staff
3. Form A
4. Guarantee/Warranty
5. Price
6. Product Features
7. Product Performance
8. Quality Approvals
9. Reputation
10. Service
11. Small Orders Accepted
Tags: CNC Pipe Bending Machine
13 十二 09 CNC Turret Punching Machine (WKC3000 Series)
CNC Turrent Punching Machine
Main functions and characteristics
1. Dealing with multitasks by the system in real time controlling.
2. Easily call the menu and the toolbar with friendship surface.
3. Loading program by drawing the menu or toolbar for choice.
4. Showing the state of operating manner, of the punch, coordinate of workpiece, and rate of punching.
5. Auto-programming by the way of AutoCAD and performing the processing program.
6. Programming with the code of ISO NC standard.
7. Editing, rewriting and saving the program.
8. Code of nesting, circulation, and other assistant function.
9. Showing the self- diagnosis of the failure.
10. Code explaining, executing, grammar checking and simulation of punching.
11. Following drawing and showing the process of punching in time.
12. Super parameter setting.
13. Freely choosing or changing coordinate system of track.
14. Feeding frame the drift by the control of the software.
15. Running by the manner of increment, high and low speed.
16. Counting and the zero clearing a bit.
17. Easily orient the plate material.
18. With the function of returning the start place automatically.
19. With the function of pre-disposal figure.
Main configure:
Mainboard of Industrial Controlling Computer and software of Windows operating system
256M memory 80G hard disk and various linker
Servo motor and drivers
Board of controlling movement which baced on DSP and CPLD
Liner guide
Accurate roll screw
15″ colorful LED displayer
Pneumatic clamps and pneumatic locking device
Long-guide international standard-tools
Non-damnifying and silken working table
25T punching press
