October 27 from CSR Zhuzhou Electric Locomotive Research Institute Wind Power Division (hereinafter referred to as “CSR wind power”) learned that the company is developing its own intellectual property rights of 5MW offshore wind turbines, and is expected to be 2012 and power generation.
Currently, due to the small wind turbine market competition, decreasing profit margins, and began large-scale development of offshore wind power, wind power major machine manufacturers and therefore transferred to the competitive position of large sea fans of market competition, the current of the machine manufacturers are struggling to study and launched a big fan 5MW and above plans.
According to CSR relevant responsible person said that wind power, which is being developed with independent intellectual property rights of 5MW offshore wind turbine to the grid in 2012. “The models take full account of the offshore wind resources, climate and wave loads, the use of advanced technology alone pitch (IPC), can effectively reduce the unit load, with a strong ability of anti-typhoon, superior ability to adapt and complete the grid with low voltage across the function. ”
According to the person in charge of the WT1500 its self-developed high-altitude wind turbine has also been in Gansu, Yunnan, Guizhou and installed high-altitude bulk orders and a substantial increase in installed capacity.
Currently, the main southern car with low wind speed wind turbine, there are WT1500 high-altitude wind power group, WT2500, WT5000 wind turbine generator and so on.
Tags: Small wind turbine
Asset financing of utility-scale renewable energy projects was 27 percent lower in the third quarter last year at $33 billion.
The increase in financing was mainly driven by offshore wind investment. Three large offshore wind farms in the North Sea totaled more than 1 gigawatt in capacity and $6.3 billion in investment.
There were also large financings for photovoltaic (PV), solar thermal and biofuel projects in the United States, a geothermal plant in Indonesia and onshore wind turbines manufacturers projects in Brazil and China, the report said.
“Over the past three years we have seen extraordinary falls in the prices of clean energy equipment — wind turbines and solar photovoltaic panels. As these figures show, this has driven up installation rates and asset investment levels,” Michael Liebreich, chief executive of Bloomberg New Energy Finance, said in a statement.
“However, there is still not enough demand to soak up significant over-supply, so prices and margins have remained under pressure and manufacturers’ share prices are being crushed,” he added.
The average price of PV modules has fallen by a third since autumn 2010 and by 70 percent since mid-2008, while wind turbine prices have fallen by 20 percent since 2009, the report showed.
This has made renewable energy technologies more cost-competitive with fossil fuel power sources but have been painful for supply chains.
However, renewable energy stocks have lagged fossil fuel energy and wider global stocks over the past few months and the year to date, underperforming as world shares slid on concerns about slow global economic growth.
Wind power generator shares have fallen sharply as the risk of f
Tags: wind turbines
Features of hummer 500W wind turbines:
1. SCF supercritical wind generator technology, generator weight only 6.5 kg, generator efficiency over 0.78.
2. Quality parts use SKF bearings and so on
3. Sine wave output, drive water pump < 370w, refrigerator <130L etc.
4. High cost performance
5. Low running noise
6. Connect with 300W solar panels to make up the wind-solar hybrid system.
Application of Model H2.7-500W wind turbine
It can drive color TV, refrigerator<=130L, pump<=370W or other resistive appliances <500W.
Well used in:
Housing, office, farm and factory
Telecommunications Station
TV Transfer Station
Monitoring Station-military, hydrology, observatory
Water-pumping Station
Main technical data
| Rated power (W) | 500 |
| Maximum output power (W) | 1000 |
| Charging voltage (V) | DC 24 |
| Blade quantity | 3 |
| Blade material | GRP |
| Blade diameter (ft.) | 9 (2.7m) |
| Start-up wind speed (mph) | 7 (3.0m/s) |
| Rated wind speed (mph) | 16 (7.0m/s) |
| Rated rotating rate (r/min) | 600 |
| Wind energy utilizing ratio (Cp) | 0.48 |
| Generator output | Frequency conversion AC |
| Output AC frequency (Hz) | 0~300 |
| Rated charging current (A) | 16.7 |
| The maximum charging current (in a short time)(A) | 25 |
| Generator efficiency | >0.78 |
| Tower diameter (in.) | 3.0*78.7*0.1 (76*2000*3 mm)(3pcs) |
| Tower height (ft.) | 20 (6m) |
| Generator weight (lb) | 14 (6.5kg) |
| Suggested Battery (Ah) | 120/150 |
Tags: wind turbines
28, Hebei Province’s first high-speed 3.0 MW offshore wind turbine permanent magnet type in Baoding Tianwei Wind Power Technology Co., Ltd. successfully off the assembly line. Baoding Tianwei Group commitment as a national science and technology to support the project, this 3.0WM independent intellectual property rights, land and sea fans of the successful dual-use offline.
It is understood, which is a 3.0MW wind turbine generator for the coastal humidity, high salt spray, rain, thunderstorms and more operating environment, using high-speed permanent magnet synchronous generator and full power converter design, the anti-corrosion, anti-salt fog, sealed, and has taken a special dehumidification technology design and use of sea-fan cooling system and large-capacity machine integration technology, the products are simple, safe, reliable, stable operation, easy maintenance and other notable features, not only the grid-friendly type units, and solve the low voltage ride-through technology to make low-speed stage high power generation efficiency, so that the product maintains its advanced technology.
Tianwei Wind Power’s first 3.0MW offshore small wind turbines developed, marking Tianwei Wind Power Equipment in large-scale wind power development and offshore wind power equipment manufacturing sector achieved a major breakthrough, further enhancing the company’s core competitiveness.
In order to ensure the successful development of wind power generators ompany to carry out the prototype as a “Pioneer Party” activities to create products, has been Communist Party members and cadres and staff a positive response, the company can form a “party first, striving to model” good atmosphere to ensure the successful completion of the product.
3 MW wind turbine off the assembly line at the same time the success of the company is stepping up research
Tags: wind turbines
Two wind turbine smooth shipment exported to the U.S., this is the first export of wind turbines in Chongqing. Batch of wind turbine power is 2.0MW, the value of $ 5,018,814.
In early July, the company officials came to Chongqing, Inspection and Quarantine at the consulting mechanical and electrical exports to the U.S. smal wind turbine related issues. Taking into account the complex structure of wind turbines, testing time-consuming, to ensure the smooth export batch of wind turbines, new energy products, helping to expand the international market, the council attaches great importance to staff of the Electrical and Mechanical Department, who personally led the charge to the factory in investigation , and practical preparatory work to develop a test program.
To ensure the smooth export of wind turbines on time, the batch of wind turbines up to 1 month of the assembly, commissioning process, the Bureau electrical inspectors at three in-depth factory braved extremely hot line, from parts to assembly into the factory test commissioning of all aspects of the whole batch of wind generators was regulated in accordance with international standards and technical requirements for the master generator electrical insulation systems, cabin systems control, pitch control system has three main parts of rigorous testing, really ” control forward, strict control, rapid clearance, “
The H6.4-5000W wind generator can drive air-condition (3-5 horsepower), 1.7KW water pump or other resistive appliances (≤5KW).
Well used in:
Housing and factory and farm
Telecommunication Station
TV Transfer Station
Monitoring Station (military, hydrology, observatory)
Water-pumping Station
shipping
| Rated power (W) | 5000 |
| Maximum output power (W) | 7500 |
| Charging voltage (V) | DC 240 |
| Blade quantity | 3 |
| Rotor blade material | GRP |
| Rotor blade diameter (ft.) | 21 (6.4m) |
| Start-up wind speed (mph) | 6 (2.5m/s) |
| Rated wind speed (mph) | 22 (10.0m/s) |
| Rated rotating rate (r/min) | 240 |
| Wind energy utilizing ratio (Cp) | 0.4 |
| Generator output | Frequency conversion AC |
| Rated charging current (A) | 20.8 |
| The maximum charging current (in a short time) (A) | 32 |
| Output AC frequency (Hz) | 0~360 |
| Generator efficiency | >0.8 |
| Free standing tower diameter (in.) | 19.5*7.3 (495*185mm) (2pcs) |
| Guy tower diameter(in.) | 8.7*78.7*0.2 (220*3000*6mm)(4pcs) |
| Tower height (ft.) | 39 (12m) |
| The weight of generator (lb) | 324 (147kg) |
| Suggested Battery (Ah) | 400/600 |

Tags: wind turbines
Hummer 10000w Wind Turbine which features high efficiency and low rated wind speed introducing several patented technologies and some special materials.
Off grid style H8.0-10000W is matched with wind-solar hybrid inverter controller, which can connect solar panel within 3000w simultaneously.
Inside , the wind-solar hybrid inverter system adopts CPU smart control . Control circuit is simplified , made of reliable and sensititive to outside environment change .
It is also designed with protection against overload ,over current and over heat . When there is no load for a long time , CPU will shut down the inverter to protect the battery .
User can check various working data on the LCD screen in front panel , or view through computer which can be linked to the inverter through RS485 port by side . We supply standard software for computer use .
Grid tied style of H8.0-10000W wind generators is matched with special HUMMER grid-tied inverter system ,which deisgned for state grid connection .

The special grid-tied inverter system adopts IGBT modules to greatly enhance sytem efficiency ,and introducing automatic optimization technology of MPPT to improve the system generation capacity .
Vestas is still the world’s top wind turbine generator manufacturer in terms of its percentage of market volume, but GE Energy lost its title as the second largest supplier to China’s Sinovel. Together Vestas and Sinovel delivered 10,228 MW of capacity in 2010. The two leading suppliers’ share of the total deliveries to the market was 25.9 percent in the year, which is a one percent increase compared with that of 2009 from the two players.
Sinovel took full advantage of the boom in the Chinese market, enabling it to move up from the third position in 2009 to second in 2010. Conversely, GE Energy dropped to third place due to the economic downturns in the US market. And, GE Energy is closely followed by another Chinese supplier, Goldwind, which installed almost the same number of turbines as GE in 2010. German Enercon ranks at No. 5 in the world, and is followed by Indian-based Suzlon Group at No. 6.
In their home wind power generator market Chinese domestic turbine manufacturers made further gains, while foreign-owned manufacturers only achieved a 10.5 percent market share in 2010 – a 3.5 percent drop from the previous year. Along with Sinovel and Goldwind, two other Chinese wind turbines manufacturers were listed in this year’s top 10 in terms of global capacity delivered. Dongfang, the third largest Chinese manufacturer, first entered the top 10 list in 2009, and United Power entered for the first time in 2010. Meanwhile, other Chinese companies Mingyang, Sewind and Hara XEMC, listed as No. 11, No. 14 and No. 15 in the world respectively, are emerging to challenge the positions of the traditional market leaders from Europe and the US.
It is worth noting that 2010 also saw more MW-rated Chinese manufactured turbines exported. During the year, five Chinese turbine suppliers installed 13 machines in five different foreign markets. Following its first three 1.5-MW direct drive wind turbines installed in the US in 2009, Goldwind installed six units of its 750-kW-rated gear drive turbines in Cuba. Meanwhile, Mingyang and A-Power installed their first wind turbines in the US market in 2010 and HEAG also installed three 1.5-MW turbines in Chile and White Russia.
Tags: wind turbines
Wind turbines are getting really big — some with blades as long as a football field — and more powerful, often generating 50 times more electricity than the first generation of wind-power machines built in the 1980s.
But scientists are also studying how to harness the wind in different ways that could help allay concerns that today’s turbines are unattractive, noisy and sometimes even dangerous.
Already in the works: Turbines that float and small wind turbines that fly. Turbines without blades and turbines with blades fat enough to fit a double-decker bus inside.
They won’t just be on hillsides either. Some will be in the ocean, while others will be on rooftops and light poles. A few will even be in the sky.
One design was inspired by the humble bumblebee.
Sabri Sansoy, a graduate of the Massachusetts Institute of Technology and former rocket engineer, has built a 19-foot-tall prototype whose blades, rather than spin in a circle, move in a figure-eight motion like the insect’s wings. Sansoy hopes the design will generate more electricity than turbines of similar size.
“I’ve been called everything from brilliant to a nincompoop over this,” said Sansoy, whose Marina del Rey, Calif., company, Green Wavelength, is looking to commercialize the technology.
But “there’s a lot of people interested in this kind of thing, taking energy out of the wind,” he said.
That’s because there’s a lot of money being poured into finding ways to ease off coal-based electricity. Last year, the Department of Energy set aside a record $79 million for its wind generators -program budget — nearly $20 million more than its previous top allotment in 1980.
Tags: wind turbines
A week of industrial-scale initiatives in wind and solar had as its highlight Chinese wind turbine manufacturer Sinovel’s capture of a deal to supply 1GW of turbines to Ireland. The transaction will be by far the largest coup for a Chinese wind turbine maker in Europe so far, and will create some anxiety in countries such as Germany, Spain and Denmark that have established turbine assembly industries.
Sinovel will supply the machines for €1.5 billion ($US2.2 billion) worth of wind farms under development over the next five years by Irish company Mainstream Renewable Power.
Mainstream, headed by Eddie O’Connor, the entrepreneur behind Airtricity, one of the most active wind farm developers of the last decade, says it will get debt finance for the new projects from China Development Bank, the state-owned lender.
The deal between Mainstream and Sinovel for small wind turbines will shine a spotlight on the dilemma facing political leaders in Europe and North America over the supply of renewable energy technology. China produces many of the cheapest wind turbines and solar panels in the world, providing the opportunity for countries to install low-cost renewable power. On the other hand, importing Chinese hardware will not create the “green jobs” that politicians crave.
Sinovel is attempting to assuage this concern by raising the prospect of inward investment in Ireland, or nearby. Lecheng Li, the company’s senior vice president, said: “As we gain certainty on project execution schedules, we will review our plans for localising operation and maintenance activities as well as possible component manufacturing.”
Ireland is not the first European country to see the prospect of the installation of Chinese-made turbines. In April, Sinovel agreed to team up with Athens-based Public Power Corporation to develop wind farms in Greece.
And the US has been the scene of a number of deals involving Chinese home turbine turbines makers in the last two years. Mainstream is developing a 106.5-megawatt project in Illinois with China’s Xinjiang Goldwind Science & Technology, and Goldwind also has projects in Minnesota, Ohio and Rhode Island.