Plate Bending Machine|Shearing Machine » plate bending machine

New wind turbine efficient land breeze

admin — Tue, 31 Aug 2010 14:04:45 +0000

Wind power development has just started for our country, wind power accounts for the electricity consumption is still very small, the face of such a huge market, why do we have more than 80 manufacturers most of the idle capacity? Why is there a serious overcapacity? Some people think that is the bottleneck of limited power, many are also considered to be excessive overheating caused by industrial development. The problem with wind power industry a huge room for development than can be said to be negligible. Currently, everyone is staring at the national and local wind power projects that point certainly does not work, we should promote the popularization of wind power generator in the search for a “breach”, a vast territory, much-needed electricity, a lot of electricity in many areas, no mountains , grassland, border posts, islands, exploration unit, enterprise factories, mines, smelting units, where a vast reservoir of development of space, if these markets are developed, use both large-scale wind power equipment, not only would be released capacity of these enterprises, may be?? capacity planning issues. So we want to promote on the popularization of wind power efforts, a substantial increase in wind power wind turbine performance for promotion throughout the country; significantly Xiangdi wind turbine costs, the cost of wind power is less than thermal power and hydropower, to improve the competitiveness of wind power.
China’s land speed lower, more wind area, but are more remote, mostly low wind areas, we also used to make little wind the upper hand motor areas, we must substantially increase the performance of wind power generation. The current wind power technology in Europe and America are to develop high-speed maritime climate wind turbines, the biggest drawback is that the land use of low power generation efficiency, three wind power generation capacity is not following basic design wind speed is 13 ~ 15 m / s, that is, to achieve the seven winds to full capacity, this wind is very rare in the land. There are the high cost of wind turbines is not conducive to promoting universal access. Increase capacity, reduce the cost of wind power is an urgent problem.
China’s wind power industry a “breach” is the efficient production and development of new wind turbines wind, this wind turbine performance should be the secondary air will be able to start, 34 wind power generation can be very good, fresh breeze can reach full capacity, suitable for promoting the use of most parts of the country, and has a good network stability, wind power costs more than 60%, basically maintenance-free so that everyone Dugan with everyone easy to use and can be achieved in to recover the investment within three years, wind turbine power generation performance and excellent low-cost development of wind power industry will open up a huge space.
First of all industrial and mining enterprises have to install large wind power equipment Xu Qiu, if an investment and enjoy the second, three years of Shou Yi, installation of the wind motor of the Ji Ji Xing Kendingfeichang Gao, for large-scale smelting Danwei, have their own power plants If extensive use of wind power, played the role of energy conservation, improving enterprise efficiency is very helpful, low-cost wind power will certainly be a lot to promote the use, the country’s mining industry is huge wind power market, this size of the market than the national investment in the construction of the “Land of the Three Gorges” big several times. All over the country there are numerous power plant, the plant can be covered with small wind turbines around, you can achieve wind power and thermal power complementary, and can fire at any time under the control of wind power electricity, which reduce power plant carbon emissions is favorable, and less investment, control flexibility, significant efficiency gains, derived from these thermal power plants around the size of wind farms will not be less than the “land of the Three Gorges,” the size of the further expansion of wind power development. China also distributed hundreds of hydropower in the mountains, the Peak has an abundance of wind, as the new wind generator can achieve maintenance-free, and install the convenience, cost and installation costs are low, do not invest too much can be achieved scale operation. Wind power has the greatest shortage is intermittent, and water is the biggest advantage of easy control, wind power and hydropower can be said is a perfect combination, and will be a development direction of wind power, wind power development has opened up for the huge development. Therefore, to develop low-cost for the breeze around the country promoting a new wind turbine efficiency is to promote wind turbine generators industry to address the excess capacity of wind power a “breakthrough.”

W67Y hydraulic press brake(popular machine)

admin — Sat, 06 Feb 2010 13:31:27 +0000

As the elevation of lower roller is constant, it is very convenient to feed and operate.

Detailed electrical schematic diagram will be provided and electrical wiring shall be made strictly as required by the drawings. Both ends of every connecting wire shall bear clear and intact number with marks of the same wire number with the connecting wire number put up on the wire terminals, which shall be indicated clearly on the electrical wiring schematic diagram.

All electrical parts of the equipment shall be superior quality products from noted enterprises and electrical protector parts (e.g. current relay, air switch and so on) shall be tested carefully before the installation to insure effective operation.

Hydraulic units used for the equipment shall be products from chinese famous Company.

The equipment shall run stably and control flexibly without blockage, leakage and abnormal noise.

The paint surface shall be clean, level and shining brightly with even thick paint film while without flow mark, leakage and other defects.

The tipping frame shall be of hydraulic tipping type and high speed.

Hydraulic transmission shall be applied for vertical displacement of upper roller and high mechanical transmission speed shall be applied for horizontal movement.

The equipment shall be highly effective and reliable with low potential for malfunction.

Angle Steel Bending Machine

admin — Mon, 04 Jan 2010 13:38:12 +0000

Angle and Flat steel round machine technical data:
1. Bend angle iron spec: 2-5#
2. Bend flat steel spec: -25*4
3. Minimum roll round diameter: Φ250(2#Angle steel, -25*4Flat steel), Φ600(5#Angle steel)
4. Roll round speed: 2m/min
5. Consume power: 4kw
6. Equipment weight: 325kg

Characteristic:
1. Used for roll round angle iron orchid flat steel ring flange.
2. One can roll make a lot of the same specification ring flange, province work and material.
3. Don’t change angle steel section form after the rolls of round, shape roller select the good steel, the intensity
Is high, life is long.

Our company:
Our main products: Spiral tube forming machine, flexible duct forming machine, auto roof forming machine, riveting machine, Pittsburgh seam lock machine. Hydraulic section steel bending machine, metal sheet flange forming machine,
TDF hydraulic folder, auto cutting to length line, pipe bending machine, FN seam welder, notching and shearing machine.

CNC Aluminium Profiles Bending Machine

admin — Mon, 28 Dec 2009 06:17:09 +0000

Digital display aluminum profiles plate bending machine Used for bending aluminum alloy channel material, angle Used for bending aluminum profile, metal profile, copper profile or special-shaped profile etc. Suitable for furniture making and iron art processing, iron window and door or aluminum window and door making.

Adopt CNC control of the machinery, easy operating and high precision. The bending range is wide, specially used for decoration craft. Adopt special device to protect the profiles when processing. Adopt colored man-machine touch-sensitive screen control; The interface is clear and easy to operate. Adopt the imported integrated PLC control, with the self-measuring and self-diagnosing function. The circuit is of high stability and nice environmental applicability and can upgrading by long distance operation through net-works.

CNC Pipe Bending Machine (SB-38CNC)

admin — Fri, 18 Dec 2009 09:32:38 +0000

CNC Pipe Bending Machine, CNC 2 Servo Motor Controlled Axes with NC Hydraulic Tube Benders

Special Features:
1. Fully automatic and cost effective CNC tube bender
2. Equipped with 3 programmable axis
3. Feeding: Servo motor
4. Rotation: Servo motor
5. Bending: Hydraulic (NC)
6. Hydraulic pressure die assist for every bending stack
7. Mandrel lubricating system
8. Wiper, clamping and pressure die seats
9. Centralized greasing system for moving areas
10. Electric cabinet cooling fan
11. Touch screen system
12. CNC 2 servo controlled axes with NC hydraulic bending
Fully automatic and cost effective

Key Specifications:
Max. Bending capability: ø 38.2 x 2.0t
Max. Bending radius: 180mm
Max. Bending angle: 210°
Standard effective mandrel length: 2200mm
Bending speed: 100° /s
Rotation speed: 220° /s
Feeding speed: 1200mm/s
Bending precision: ± 0.1
Rotation precision: ± 0.1
Feeding precision: ± 0.1
Total power: 5.5Kw
Max. Pressure: 12Mpa
Size: 3900x1000x1200mm
Weight: 1800Kg

Standard Accessories:
1. Tool Kit
2. Tooling Package
3. Manual Book

Primary Competitive Advantages:
1. Country of Origin
2. Experienced Technical Staff
3. Form A
4. Guarantee/Warranty
5. Price
6. Product Features
7. Product Performance
8. Quality Approvals
9. Reputation
10. Service
11. Small Orders Accepted

CNC Turret Punching Machine (WKC3000 Series)

admin — Sun, 13 Dec 2009 14:32:19 +0000

CNC Turrent Punching Machine
Main functions and characteristics
1. Dealing with multitasks by the system in real time controlling.
2. Easily call the menu and the toolbar with friendship surface.
3. Loading program by drawing the menu or toolbar for choice.
4. Showing the state of operating manner, of the punch, coordinate of workpiece, and rate of punching.
5. Auto-programming by the way of AutoCAD and performing the processing program.
6. Programming with the code of ISO NC standard.
7. Editing, rewriting and saving the program.
8. Code of nesting, circulation, and other assistant function.
9. Showing the self- diagnosis of the failure.
10. Code explaining, executing, grammar checking and simulation of punching.
11. Following drawing and showing the process of punching in time.
12. Super parameter setting.
13. Freely choosing or changing coordinate system of track.
14. Feeding frame the drift by the control of the software.
15. Running by the manner of increment, high and low speed.
16. Counting and the zero clearing a bit.
17. Easily orient the plate material.
18. With the function of returning the start place automatically.
19. With the function of pre-disposal figure.
Main configure:
Mainboard of Industrial Controlling Computer and software of Windows operating system
256M memory 80G hard disk and various linker
Servo motor and drivers
Board of controlling movement which baced on DSP and CPLD
Liner guide
Accurate roll screw
15″ colorful LED displayer
Pneumatic clamps and pneumatic locking device
Long-guide international standard-tools
Non-damnifying and silken working table
25T punching press

WC67Y-Hydraulic Press Brake Machine

admin — Tue, 08 Dec 2009 04:28:16 +0000

The Back and side safety guard. Chinese good Gear Pump, American OMG Valve, Japan Sealing rings. Chinese E10 LCD Display, Normal screw, CE electrics. Back Guard with function of switch off when the back Guard be opened. Electric back gauge, Good quality painting. Improve the machine according to European customer suggestions.

Optional Accessories

*Light Curtain
*Quick Clamping Device
*DA41, DA51 Control
*Ball Screw
*Chinese E200 Control
*Bottom of machine With Body Processing

Check out all Product Listings for plate rolling machine

admin — Sat, 07 Nov 2009 10:49:30 +0000

The brief introduction of Movement of upper and bottom roller

Upper plate rolling machine can do both level movement (move from left to right) and vertical movement (move from up to down).

Bottom roller is fixed. It just does rotation clockwise and counterclockwise.

Pre-bending is achieved by horizontal movement of upper roller and presses the end of plate .High precision pre-bending; freely control the straight side of plate.

Rolling round, it is achieved by means of the motor and reducer to drive two bottom rollers.

The tipping device is very flexible, plate bending machine make the roller plate material can be got off easily.

The support roller improves the precision of rolling process, which can make rolling process more smoothly and perfectly.

The main features of this machine are as follows:

Prominent rolling precision

Unique bending technology, which can control the back angle and straight line efficiently

Man-machine interaction interface, efficient intelligent operation

Physical bending technology software, man-machine interaction window, automatic compensation during the process of bending

Single person operation, efficient and convenient

It can roll the plate material into O type, U type, multistage R and other different type.

plate bending machine (mechancial 3-roller)

admin — Mon, 02 Nov 2009 10:03:52 +0000

1) The three roller Plate Bending Machine adopts three-roller symmetrical structure with the upper roller moving vertically in the centre between the two lower rollers ,which is achieved through the drive of the screw,the nut ,the worm and the lead screw.

2) The two lower rollers rotates ,and provides the plate materials with torque through the engagement of the output gear of the moderator with the gear of the lower rollers.

3) The disadvantage of the plate bending machine is that the ends of the plate materials need to have the help from other equipment for pre-bending.

Plate bending machines devices in which a workpiece

admin — Fri, 23 Oct 2009 14:40:30 +0000

Plate bending machines devices in which a workpiece is held between the forming die and the secondary clamp block of a plate and tube bending fixture. When the primary clamp block of the plate bending fixture is rotated to achieve a bending moment in the workpiece, the workpiece is bent until the primary clamp block revolves to a top point where rotation ceases and the workpiece is formed exactly into the expected angle of bend.At the same time, the primary clamp block cushioning mount has shock absorbing springs inside and the pressure cylinder mount absorbs shock from the force generated when force is applied to the workpiece during bending which is uniformly dispersed by the primary clamp block such that the workpiece is formed precisely at the expected angle of bend, with the workpiece surface remaining smooth and free of pressure marks